1. Welcome to AquaScaping World!

    Become a register member to get FULL SITE ACCESS AND BENEFITS.

    Join the ASW community now!

    Dismiss Notice

Tips on Creating a DIY ADA Stand

Discussion in 'AquaScaping World Magazine Discussions' started by John N., May 6, 2008.

  1. John N.

    John N. Administrator Staff Member

    Joined:
    Oct 30, 2007
    Likes Received:
    343
    Location:
    California
    Please discuss and comment on Kristoffer Willerslev Jørgensen's Tips on Creating a DIY ADA Stand here.

    [​IMG]

    -John N.
     
  2. Roy Deki

    Roy Deki New Member

    Joined:
    Feb 23, 2008
    Likes Received:
    7
    Location:
    Chandler AZ
    Nice workmanship...Do you have any close up photos? Also I would like to know the material cost for this project.
     
  3. Rastaman

    Rastaman New Member

    Joined:
    Feb 24, 2008
    Likes Received:
    0
    Location:
    Croatia
    Very neat job! I build mine on similar way (laminate-lined), but with less profesional tool - regarding to trimming the laminate with a router. Here is an alternative to do that with half-rounded rasp (for metal). It's going pretty fast, about 30 sec. per meter :D You just have to grind only when going towards afore with rasp, to avoid laminate cracking. Picture will describe that better than me :))
    [​IMG]
     
  4. Anti-Pjerrot

    Anti-Pjerrot New Member

    Joined:
    Feb 25, 2008
    Likes Received:
    1
    Location:
    Copenhagen, Denmark
    There are some more shots here
     
  5. Xavinou

    Xavinou New Member

    Joined:
    Oct 21, 2010
    Likes Received:
    0
    Location:
    Fr
    Hello here,

    Anti-Pjerrot, I like your job about your DIY Ada stand :=D>

    I would like to get the pieces to do it myself. Can you send me the list with the dimensions?

    Best regards
     
  6. texou

    texou New Member

    Joined:
    Aug 8, 2008
    Likes Received:
    0
    Location:
    France
    Hi,

    Very good job!!!

    Where do you find/buy the laminate? Directly deal with Formica?

    Thanks in advance for answer.
     
  7. Anti-Pjerrot

    Anti-Pjerrot New Member

    Joined:
    Feb 25, 2008
    Likes Received:
    1
    Location:
    Copenhagen, Denmark
    Hi

    A full set of technical drawings in pdf can be downloaded here http://peecee.dk/upload/download/178610

    Regarding the laminate, i got it through an acquaintance in a aquatic plant forum in denmark.
     
  8. texou

    texou New Member

    Joined:
    Aug 8, 2008
    Likes Received:
    0
    Location:
    France
    Thanks for answering!!

    I must find the same material in France... searching for!!
     
  9. Xavinou

    Xavinou New Member

    Joined:
    Oct 21, 2010
    Likes Received:
    0
    Location:
    Fr
    Hi,

    thank you for the PDF! Lets go to work ;)
     

Share This Page

Sponsored link: